Steam Cleaning Equipment Accessories

Universal Handle

Features quick-fit connections, vapor and detergent pipes and a protective cover. The hose a variety of standard and protective covers and in various lengths with the maximum length determined by the model cleaner.

UltraVapor Model Part Number
6 KW Junior 4201/VD
9 KW Super 4201/VD/AT
18 KW Special 2 4201/VD/AT
36 KW Maxi 4201/VD/AT

Usage instructions/Notes: ensure that hose remains unkinked for optimum performance and long life.

Universal Handgrip

Long Lances

Applications: For use on hard to reach surfaces and those that are not flat. Perfect for reaching in behind obstructions and on surfaces and equipment that have crevices, cracks, wires and cables etc.

Length Part Number
78 cm 202/VD
110 cm 202/VD/110

Usage instructions/Notes: The vapor discharge pressure will blow away any loose materials and soils but to clean and sanitize, the tip of the lance should be as close as possible to the surface being cleaned, optimizing the effect of the heat in melting/dissolving soils and sanitizing the surface.

Long Lance

Short Lance

Applications: A very easy to handle tool useful for the thorough cleaning of small surfaces and complex shaped objects. Allows close-up cleaning of items held in a clamp or in the operator’s gloved hand.

Part Number 207/VD

Usage instructions/Notes: Operator should wear safety gloves when holding items to be cleaned.

Short Lance

Suction Lances

Applications: Very practical tool for cleaning small surfaces and parts – vapor is introduced through a centered lance and suction removes soils and any moisture. Excellent for confined small areas where visibility and soil removal would be an issue.

Length Part Number
Short 218/VDA
Long 218/VDA/50

Usage instructions/Notes: Rea vacuum which is controlled from the Universal handle is recommended however any suction source can be used.

Suction Lance

Brush Holders

Applications: The brush holder allows nylon or stainless steel brushes to be used along with the vapor to remove encrusted dirts, help break up greases & oils and break down biofilms.

Length Part Number
Short 203/VD
Long 203/VD/40

Usage instructions/Notes: As with most accessories contact with the surface being cleaned achieves the best results by ensuring maximum heat is transferred to the soils being removed.

Brush Holder

Squeegees

Applications: The brush holder allows nylon or stainless steel brushes to be used along with the vapor to remove encrusted dirts, help break up greases & oils and break down biofilms.

Width Part Number
25 cm 204/VD
35 cm 205/VD
45 cm 206/VD

Usage instructions/Notes: As with most accessories contact with the surface being cleaned achieves the best results by ensuring maximum heat is transferred to the soils being removed.

Squeegee

Floor Squeegee

Applications: Perfect for cleaning and sanitizing floors quickly. Vapor penetrates holes and cracks in the floor loosening soils, fats, oils and greases allowing them to be directed to a drain or other collection area. The vapor heat leaves the floor dry and ready to handle traffic.

Part Number 209/VD

Usage instructions/Notes: Always pull the squeegee towards you and towards the drain. If there are ground in soils or embedded fats etc a floor tool with a brush strip to break up stubborn soils may be better.

Floor Squeegee

Suction Brushes

Applications: These brushes combine vapor, mechanical abrasion with a nylon bristle strip and vacuum to remove all moisture and soils. Ideal for cleaning and sanitizing smooth and semi smooth surfaces where the cleaned surface must be dry and ready to use after cleaning. Perfect for conveyor belts in food preparation facilities. Also useful in cleaning fabrics and other surfaces where moisture needs to be removed as part of cleaning process.

Size Part Number
7 cm 210/7/VDA
25 cm 210/VDA
33 cm 211/VDA

Usage instructions/Notes: The suction units can be firmly held in place while the conveyor is run allowing an operator to clean an entire belt from one location. Rea also has available special brackets that let these brushes be temporarily installed on a line and operated without an operator being in attendance! Custom sizes for specific conveyor belt sizes can be provided as an option.

Suction Brush

Floor Brushes

Applications: Perfect for cleaning hard surfaces where cleaning, sanitizing and drying is required. Can be used with or without detergent. Vapor and agitation strip break up soils, fats, greases and oils and vacuum removes them for appropriate disposal.

Used for Hazmat cleanup as well as blood, greases, sugars etc in food preparation.

Size Part Number
35 cm 212/VDA
70 cm 213/VDA

Usage instructions/Notes: Push unit away at an upward angle when applying vapor and optional detergent. Pull unit toward you with head flat to floor when suctioning soil and debris. The 70 cm tool is only recommended for smooth and very flat floors.

Floor Brush

Floor Scraper

Applications: The floor scrapers are ideal for flat surfaces with ground in or persistent soils such as organic scale, carbon residue, paint & adhesives, molds/mildews, dried sugars/syrups etc.

Size Part Number
11 cm brush 214/VD
Two 11 cm brushes 215/VD

Usage instructions/Notes: The vapor will loosen the soil and the steel brushes will break it up. Use of a small amount of detergent to emulsify and encapsulate the resultant soils will make it easy to squeegee or suction away.

Floor Scraper

Chemicals & Detergents

Applications: Rea has available a variety of chemicals and detergents to help with particularly difficult cleaning tasks. For Food Service applications we have CFIA acknowledged products.

Usage instructions/Notes: N/A

Detergent

We offer dealers across North America to serve you better!

For information on becoming a REA dealer please contact us

West Coast  USA Flag

PSI
Chuck Buchanan
7200 Garden Grove Blvd.
Westminster, CA  92683

1-800-757-52222
714-895-6694

East Coast  USA Flag

Natures Perfect Solvent
12701 Wetherburn Lane
Charlotte, NC  28262

1-980-253-3748

South East  USA Flag

Greenway Cleaning Technologies
Bill McLeish
Cumming, GA  30041

1-678-735-1599
gct.bill@yahoo.com

Canada  Canada Flag

Rea UltraVapor Corp.
7500 HWY 27 Unit 16,
Woodbridge, Ontario, Canada L4H 0J2

1-888-860-4377

Eastern Canada  Canada Flag

Soluvap Inc.
701 Charles-de-Couagne
Terrebonne, QC  J6V 1J8

info@soluvap.com
1-514-655-6887