Suction Lances

Clean and dry in a single pass

Vapor through a centred lance with suction drawing soils and moisture straight back out — for confined areas, cavities and anywhere the surface has to be left dry. Requires the REA vacuum unit.

Suction Lances
JUMP TO ↓
Talk to a specialist
Highlights

What the suction lances do

The vapor jet sits inside an extraction shroud, so loosened soil and condensate leave with the airflow instead of running down the machine. Suction is switched at the handle, not at the generator.

Centred vapor jet inside a surrounding extraction shroud.
Leaves surfaces dry and ready for production.
Vacuum switched from the universal handle at 24 V.
AISI 304 stainless steel, no absorbent parts.
Removes soil and residual moisture in the same pass.
For confined areas, cavities, tanks and machine interiors.
Two standard lengths — short and 50 cm.
Requires the REA vacuum recovery unit.
Technical Specifications

Suction Lances, at spec

Short lance 218/VDA
Long lance 218/VDA/50 — 50 cm
Required unit REA vacuum recovery unit
Coupling Quick-fit to universal handle 4201/VD/AT
Material AISI 304 stainless steel
Industries Food Industry, Mechanical Industry
Dimensions N/A
Usage & Care

Three rules in daily use

Start the suction first

Open extraction before the vapor trigger so loosened soil is carried away rather than spread across the surface.

Work toward the extraction point

Move the lance in the direction of airflow. Working against it pushes condensate back onto cleaned surfaces.

Empty the recovery tank each shift

A full tank cuts suction long before it stops. Drain and rinse the tank and filter at the end of every shift.

Suction tooling needs the REA vacuum unit — specify both together when ordering.

Request a demo
Request a demo